EAC Certification for motorcycle

requirements and procedure for obtaining EAC documents

NEED HELP WITH CERTIFICATION?

Required field
1/

Motorcycle certification within the Eurasian Economic Union (EAEU) is a mandatory step for legally releasing products onto the market. Without the necessary permits, motorcycles cannot be imported, sold, or operated within the EAEU. The key confirmation of compliance is the EAC marking, which proves that all necessary inspections and tests have been passed. In this article, we will examine in detail the technical regulations applicable to motorcycles, when a certificate or declaration is required, and the full certification process.

Regulatory framework

The following technical regulations of the Customs Union (TR CU) are applied to the certification of motorcycles:

The EAC marking is placed on products only after successful completion of all procedures stipulated by the relevant regulations.

List of products

The following categories of motor vehicles fall under the scope of TR CU 018/2011 (including taking into account classification according to HS codes):

  1. Motorcycles with an engine capacity over 50 cm³ and a maximum design speed of over 50 km/h.
  2. Mopeds and light motorcycles with an engine capacity of up to 50 cm³.
  3. Three-wheeled motorcycles and trikes .
  4. Sports motorcycles intended for use on closed tracks (in some cases, require separate evaluation schemes).
  5. Electric motorcycles and electric scooters with a certain power and speed.
  6. Motorcycles for special purposes (e.g. for police, rescue services).
  7. Custom motorcycles and small-scale production models (require a special approach to confirming compliance).
  8. Quadricycles of category L6e/L7e, if they are classified as motor vehicles.
  9. Motorcycles supplied in complete knock down (CKD) form, if the kit allows for the assembly of a complete vehicle.
  10. Motorcycles for disabled people and specialized vehicles based on a motorcycle platform.

The exact type of document (certificate or declaration) depends on the product’s parameters and its HS code. For example, mass-produced motorcycles are more often certified using a standard certification scheme, while small-scale or one-off production may be certified using other schemes requiring additional testing.

Procedure and terms of registration

The motorcycle certification process includes the following main stages:

  1. Product identification and determination of applicable regulations. At this stage, the technical specifications, intended use, and HS code are analyzed to determine which specific CU TR regulations apply and what type of document is required.
  2. Selecting a conformity assessment scheme. For motorcycles, serial production certification schemes (e.g., 1c, 3c) or batch/single-unit schemes (9c, 10c) are most often used. For declaration purposes, schemes 1d, 3d, 4d, and others are used, depending on the situation.
  3. Preparation of technical documentation. This includes drawings, descriptions, operating documents, and data on components and materials.
  4. Sampling and testing. Samples are tested in an accredited laboratory for compliance with TR CU requirements (brakes, lighting, noise, emissions, stability, etc.).
  5. Production analysis (if necessary). For serial production, an on-site production audit or a QMS certificate may be required.
  6. Preparation of the final document. This may be a certificate of conformity or a declaration of conformity registered in the registry.
  7. EAC marking of products. After receiving the document, motorcycles are marked with the EAC mark, confirming their compliance with EAEU requirements.

Processing times depend on the complexity of the product, the chosen protocol, and laboratory workload. On average:

  • Preparation of documents and identification – from 3 to 7 working days.
  • Sample testing takes from 10 to 20 business days (sometimes longer if additional tests are needed).
  • Registration of a certificate/declaration takes from 5 to 10 working days.

The final period can range from 3 to 6 weeks, and in complex cases – longer.

List of documents

To obtain a certificate or declaration for motorcycles, the following documents will be required:

  • Application.
  • Technical description of the product, including main parameters, characteristics and purpose.
  • Drawings, diagrams, photographs and other materials that allow for the unambiguous identification of the product.
  • Operating documentation (operating manual, product passport).
  • Documents on components and accessories (if they affect safety and are subject to separate regulations).
  • Contract, invoice, shipping documents (for imported products).
  • Information about the manufacturer, including address, contact details and registration data.
  • Quality Management System Certificate (if applicable under the chosen scheme).
  • Previous test reports (if any).

When is a certificate needed and when is a declaration needed?

The document type is determined by the regulations and product parameters:

  • A certificate of conformity is most often required for serial products, mass-produced motorcycles, and in cases where the regulations directly provide for certification.
  • Declaration of conformity is applied for individual product categories, batches or when using certain assessment schemes.
  • In some cases, other forms of conformity assessment may be applied (for example, state registration or special permits) if the product meets additional requirements.

A key factor is not only the type of equipment, but also its HS code: this helps determine precisely which regulations apply and what document to issue.

Certification schemes

The most common motorcycle circuits are:

  • 1c, 3c – for serial production: provide for testing of samples and analysis of the production status.
  • 9c, 10c – for a batch or a single copy: the emphasis is on testing specific samples.
  • 1d, 3d, 4d — declaration schemes: differ in the amount of evidence and the need to involve an accredited laboratory.

The choice of scheme affects the time frame, cost and list of required documents.

Conclusion

Motorcycle certification according to the CU TR is a multi-stage process that requires a precise understanding of the applicable regulations, the correct selection of the procedure, and careful document preparation. The EAC marking confirms that the product meets safety requirements and can freely circulate within the EAEU market. Since the type of document (certificate or declaration) directly depends on the vehicle’s parameters and its HS code, any identification error can lead to registration denial or customs clearance issues.

To verify and accurately assess your case, we recommend contacting the experts at MASTCERT: they will help you determine the necessary regulations, select the optimal scheme, and calculate the timeframe and cost of certification for your product.

HAVE A PROJECT?
I am interested in discussing a certification procedure for my product My name is and you can email me at

By clicking Submit, you agree to Fresh Consulting’s Privacy Policy.

COMPANIES WHICH TRUST MASTCERT